Saltire Hose Supplies
Dive Panel Gauges
The European Standards EN837-1 states than any pressure gauges used on a gas ranged above 25 Bar must be of a “safety pattern design” designated either S2(without a baffle wall) or S3 ( with a baffle wall) depending on the gauge chamber.
All gauges used on oxygen shall also be of a “safety pattern design”.
This range of 63mm gauges specifically designed for dive panels meets the above safety requirements of the European Standards EN837-1 for use on oxygen and compressed gases and are manufactured to two distinctly different designs.
The S2 safety design has a simple blow-out safety device but has been tested to meet the Energy Release test as defined in the European Standard EN837-1 and can be supplied with an EC Declaration of Conformity. confirming it has met and passed this test.
The S3 safety design offers greater protection to the operator and features an internal solid baffle wall between the measuring element and the window, an entire blow-out back and a laminated safety glass window.
63mm Safety Gauges S2
The S2 63mm Diameter Safety Gauge has been designed for commercial diving companies wishing to comply with the S2 specification safety guidelines of the European Standards EN837 – 1 relating to pressure gauges for use on gas and oxygen applications. The gauge also conforms to IMCA Life Support Gauge specification as per Detail Sheet 19 of the February 1999 Code of Practice.
- 63mm diameter pressure gauge
- Oxygen and crossed oil can marked on dial
- Meets IMCA requirements
- Bottom, back and panel mounting options available.
63mm Safety Gauges S3
THe S3 63mm diameter safety gauge offers greater protection than the S2 design with a solid baffle wall, blow out back and laminated safety pattern window. Ideal for use on air, gas and oxygen applications the gauge conforms to IMCA Life Support Gauge specification as per Detail Sheet 19 of the February 1999 Code of Practice.
- 63mm diameter full safety pattern pressure gauge.
- Oxygen and crossed oil can marked on dial.
- Solid baffle wall, blow out back and laminated safety window.
- Meets IMCA requirements.